• يرجى نسخ / لصق رسالة الخطأ التي تراها على الشاشة ، إن وجدت.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• يرجى توضيح ما تريد القيام به ، ماذا فعلت وما حدث

I tried reloading the game, but interface options were unchanged.

• ما هو متصفحك؟

• يرجى نسخ / لصق النص المعروض باللغة الإنجليزية بدلاً من لغتك. إذا كان لديك لقطة شاشة لهذا الخطأ (ممارسة جيدة) ، يمكنك استخدام Imgur.com لتحميله ونسخ / لصق الرابط هنا.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• هل هذا النص متاح في translation system ؟ إذا كانت الإجابة بنعم ، فهل تمت ترجمتها لأكثر من 24 ساعة؟

I tried reloading the game, but interface options were unchanged.

• ما هو متصفحك؟

• يرجى توضيح اقتراحك بدقة وإيجاز بحيث يكون من السهل قدر الإمكان فهم ما تعنيه.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• ما هو متصفحك؟

• ما الذي تم عرضه على الشاشة عندما تم حظرك (شاشة فارغة؟ جزء من واجهة اللعبة؟ رسالة خطأ؟)

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• ما هو متصفحك؟

• أي جزء من القواعد تم مخالفته في تصميم التبني لدى BGA

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• هل انتهاك القواعد مرئي عند إعادة اللعب؟ إذا كانت الإجابة بنعم ، فبأي رقم؟

I tried reloading the game, but interface options were unchanged.

• ما هو متصفحك؟

• ما هو نشاط اللعبة الذي أردت القيام به؟

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• ماذا تحاول أن تفعل لتحريك هذا العمل اللعبة؟

I tried reloading the game, but interface options were unchanged.

• ماذا حدث عند محاولة القيام بهذا (رسالة خطأ ، رسالة شريط حالة اللعبة ، ...)؟

n/a

• ما هو متصفحك؟

• في أي خطوة من اللعبة حدثت المشكلة (ما هو تعليمة اللعبة الحالية)؟

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• ماذا حدث عند محاولة إجراء هذه الحركة داخل اللعبة (رسالة خطأ ، رسالة شريط حالة اللعبة ، ...)؟

I tried reloading the game, but interface options were unchanged.

• ما هو متصفحك؟

• يرجى وصف مشكلة العرض. إذا كان لديك لقطة شاشة لهذا الخطأ (ممارسة جيدة) ، يمكنك استخدام Imgur.com لتحميله ونسخ / لصق الرابط هنا.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• ما هو متصفحك؟

• يرجى نسخ / لصق النص المعروض باللغة الإنجليزية بدلاً من لغتك. إذا كان لديك لقطة شاشة لهذا الخطأ (ممارسة جيدة) ، يمكنك استخدام Imgur.com لتحميله ونسخ / لصق الرابط هنا.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• هل هذا النص متاح في translation system ؟ إذا كانت الإجابة بنعم ، فهل تمت ترجمتها لأكثر من 24 ساعة؟

I tried reloading the game, but interface options were unchanged.

• ما هو متصفحك؟

• يرجى توضيح اقتراحك بدقة وإيجاز بحيث يكون من السهل قدر الإمكان فهم ما تعنيه.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• ما هو متصفحك؟