• يرجى نسخ / لصق رسالة الخطأ التي تراها على الشاشة ، إن وجدت.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• يرجى توضيح ما تريد القيام به ، ماذا فعلت وما حدث

• ما هو متصفحك؟

• يرجى نسخ / لصق النص المعروض باللغة الإنجليزية بدلاً من لغتك. إذا كان لديك لقطة شاشة لهذا الخطأ (ممارسة جيدة) ، يمكنك استخدام Imgur.com لتحميله ونسخ / لصق الرابط هنا.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• هل هذا النص متاح في translation system ؟ إذا كانت الإجابة بنعم ، فهل تمت ترجمتها لأكثر من 24 ساعة؟

• ما هو متصفحك؟

• يرجى توضيح اقتراحك بدقة وإيجاز بحيث يكون من السهل قدر الإمكان فهم ما تعنيه.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• ما هو متصفحك؟

• ما الذي تم عرضه على الشاشة عندما تم حظرك (شاشة فارغة؟ جزء من واجهة اللعبة؟ رسالة خطأ؟)

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• ما هو متصفحك؟

• أي جزء من القواعد تم مخالفته في تصميم التبني لدى BGA

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• هل انتهاك القواعد مرئي عند إعادة اللعب؟ إذا كانت الإجابة بنعم ، فبأي رقم؟

• ما هو متصفحك؟

• ما هو نشاط اللعبة الذي أردت القيام به؟

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• ماذا تحاول أن تفعل لتحريك هذا العمل اللعبة؟

• ماذا حدث عند محاولة القيام بهذا (رسالة خطأ ، رسالة شريط حالة اللعبة ، ...)؟

• ما هو متصفحك؟

• في أي خطوة من اللعبة حدثت المشكلة (ما هو تعليمة اللعبة الحالية)؟

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• ماذا حدث عند محاولة إجراء هذه الحركة داخل اللعبة (رسالة خطأ ، رسالة شريط حالة اللعبة ، ...)؟

• ما هو متصفحك؟

• يرجى وصف مشكلة العرض. إذا كان لديك لقطة شاشة لهذا الخطأ (ممارسة جيدة) ، يمكنك استخدام Imgur.com لتحميله ونسخ / لصق الرابط هنا.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• ما هو متصفحك؟

• يرجى نسخ / لصق النص المعروض باللغة الإنجليزية بدلاً من لغتك. إذا كان لديك لقطة شاشة لهذا الخطأ (ممارسة جيدة) ، يمكنك استخدام Imgur.com لتحميله ونسخ / لصق الرابط هنا.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• هل هذا النص متاح في translation system ؟ إذا كانت الإجابة بنعم ، فهل تمت ترجمتها لأكثر من 24 ساعة؟

• ما هو متصفحك؟

• يرجى توضيح اقتراحك بدقة وإيجاز بحيث يكون من السهل قدر الإمكان فهم ما تعنيه.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• ما هو متصفحك؟