• يرجى نسخ / لصق رسالة الخطأ التي تراها على الشاشة ، إن وجدت.

I've noticed a few display annoyances when playing a stress card.

1) Playing a stress card does not change the dot to where your car will end. If I just play a 4 the dot is 4 spaces ahead. If I play a 4 and Stress, the dot is 4 spaces ahead. Please adjust the dot to be 5-8 spaces ahead so there are four dots. This will account for the range of spaces. A minor upgrade from there would be to use the known information of what is in my hand and top card of discard. For example, if I have two 3s in my hand and the last 3 is the top of my discard then the stress is only 1,2 or 4 - so the dots would be at 4+(1,2,4) = 5,6,8.

2) When resolving the stress card, the flipped card is just added to the play area. Please overlap the Stress card with the flipped card as I would in real life.

3) Similarly, when resolving a boost, please don't just add the boost flip card to the play area. Maybe separate it by a little space, or if possible, add a heat icon to it to mark it as the boosted card.

Again, these are minor annoyances, though issue 1 could cause people to spin out around a corner.

• يرجى توضيح ما تريد القيام به ، ماذا فعلت وما حدث

• ما هو متصفحك؟

• يرجى نسخ / لصق النص المعروض باللغة الإنجليزية بدلاً من لغتك. إذا لديك لقطة شاشة عن هذا الخطأ (من المفضل)، يمكنك استخدام خدمة إستضافة للصور من اختيارك (snipboard.io مثلاً) لتحميلها و نسخ/لصق الرابط هنا. هل هذا النص متاح في translation system ؟ إذا كانت الإجابة بنعم ، فهل تمت ترجمتها لأكثر من 24 ساعة؟

I've noticed a few display annoyances when playing a stress card.

1) Playing a stress card does not change the dot to where your car will end. If I just play a 4 the dot is 4 spaces ahead. If I play a 4 and Stress, the dot is 4 spaces ahead. Please adjust the dot to be 5-8 spaces ahead so there are four dots. This will account for the range of spaces. A minor upgrade from there would be to use the known information of what is in my hand and top card of discard. For example, if I have two 3s in my hand and the last 3 is the top of my discard then the stress is only 1,2 or 4 - so the dots would be at 4+(1,2,4) = 5,6,8.

2) When resolving the stress card, the flipped card is just added to the play area. Please overlap the Stress card with the flipped card as I would in real life.

3) Similarly, when resolving a boost, please don't just add the boost flip card to the play area. Maybe separate it by a little space, or if possible, add a heat icon to it to mark it as the boosted card.

Again, these are minor annoyances, though issue 1 could cause people to spin out around a corner.

• ما هو متصفحك؟

• يرجى توضيح اقتراحك بدقة وإيجاز بحيث يكون من السهل قدر الإمكان فهم ما تعنيه.

I've noticed a few display annoyances when playing a stress card.

1) Playing a stress card does not change the dot to where your car will end. If I just play a 4 the dot is 4 spaces ahead. If I play a 4 and Stress, the dot is 4 spaces ahead. Please adjust the dot to be 5-8 spaces ahead so there are four dots. This will account for the range of spaces. A minor upgrade from there would be to use the known information of what is in my hand and top card of discard. For example, if I have two 3s in my hand and the last 3 is the top of my discard then the stress is only 1,2 or 4 - so the dots would be at 4+(1,2,4) = 5,6,8.

2) When resolving the stress card, the flipped card is just added to the play area. Please overlap the Stress card with the flipped card as I would in real life.

3) Similarly, when resolving a boost, please don't just add the boost flip card to the play area. Maybe separate it by a little space, or if possible, add a heat icon to it to mark it as the boosted card.

Again, these are minor annoyances, though issue 1 could cause people to spin out around a corner.

• ما هو متصفحك؟

• ما الذي تم عرضه على الشاشة عندما تم حظرك (شاشة فارغة؟ جزء من واجهة اللعبة؟ رسالة خطأ؟)

I've noticed a few display annoyances when playing a stress card.

1) Playing a stress card does not change the dot to where your car will end. If I just play a 4 the dot is 4 spaces ahead. If I play a 4 and Stress, the dot is 4 spaces ahead. Please adjust the dot to be 5-8 spaces ahead so there are four dots. This will account for the range of spaces. A minor upgrade from there would be to use the known information of what is in my hand and top card of discard. For example, if I have two 3s in my hand and the last 3 is the top of my discard then the stress is only 1,2 or 4 - so the dots would be at 4+(1,2,4) = 5,6,8.

2) When resolving the stress card, the flipped card is just added to the play area. Please overlap the Stress card with the flipped card as I would in real life.

3) Similarly, when resolving a boost, please don't just add the boost flip card to the play area. Maybe separate it by a little space, or if possible, add a heat icon to it to mark it as the boosted card.

Again, these are minor annoyances, though issue 1 could cause people to spin out around a corner.

• ما هو متصفحك؟

• أي جزء من القواعد تم مخالفته في تصميم التبني لدى BGA

I've noticed a few display annoyances when playing a stress card.

1) Playing a stress card does not change the dot to where your car will end. If I just play a 4 the dot is 4 spaces ahead. If I play a 4 and Stress, the dot is 4 spaces ahead. Please adjust the dot to be 5-8 spaces ahead so there are four dots. This will account for the range of spaces. A minor upgrade from there would be to use the known information of what is in my hand and top card of discard. For example, if I have two 3s in my hand and the last 3 is the top of my discard then the stress is only 1,2 or 4 - so the dots would be at 4+(1,2,4) = 5,6,8.

2) When resolving the stress card, the flipped card is just added to the play area. Please overlap the Stress card with the flipped card as I would in real life.

3) Similarly, when resolving a boost, please don't just add the boost flip card to the play area. Maybe separate it by a little space, or if possible, add a heat icon to it to mark it as the boosted card.

Again, these are minor annoyances, though issue 1 could cause people to spin out around a corner.

• هل انتهاك القواعد مرئي عند إعادة اللعب؟ إذا كانت الإجابة بنعم ، فبأي رقم؟

• ما هو متصفحك؟

• ما هو نشاط اللعبة الذي أردت القيام به؟

I've noticed a few display annoyances when playing a stress card.

1) Playing a stress card does not change the dot to where your car will end. If I just play a 4 the dot is 4 spaces ahead. If I play a 4 and Stress, the dot is 4 spaces ahead. Please adjust the dot to be 5-8 spaces ahead so there are four dots. This will account for the range of spaces. A minor upgrade from there would be to use the known information of what is in my hand and top card of discard. For example, if I have two 3s in my hand and the last 3 is the top of my discard then the stress is only 1,2 or 4 - so the dots would be at 4+(1,2,4) = 5,6,8.

2) When resolving the stress card, the flipped card is just added to the play area. Please overlap the Stress card with the flipped card as I would in real life.

3) Similarly, when resolving a boost, please don't just add the boost flip card to the play area. Maybe separate it by a little space, or if possible, add a heat icon to it to mark it as the boosted card.

Again, these are minor annoyances, though issue 1 could cause people to spin out around a corner.

• ماذا تحاول أن تفعل لتحريك هذا العمل اللعبة؟

• ماذا حدث عند محاولة القيام بهذا (رسالة خطأ ، رسالة شريط حالة اللعبة ، ...)؟

• ما هو متصفحك؟

• في أي خطوة من اللعبة حدثت المشكلة (ما هو تعليمة اللعبة الحالية)؟

I've noticed a few display annoyances when playing a stress card.

1) Playing a stress card does not change the dot to where your car will end. If I just play a 4 the dot is 4 spaces ahead. If I play a 4 and Stress, the dot is 4 spaces ahead. Please adjust the dot to be 5-8 spaces ahead so there are four dots. This will account for the range of spaces. A minor upgrade from there would be to use the known information of what is in my hand and top card of discard. For example, if I have two 3s in my hand and the last 3 is the top of my discard then the stress is only 1,2 or 4 - so the dots would be at 4+(1,2,4) = 5,6,8.

2) When resolving the stress card, the flipped card is just added to the play area. Please overlap the Stress card with the flipped card as I would in real life.

3) Similarly, when resolving a boost, please don't just add the boost flip card to the play area. Maybe separate it by a little space, or if possible, add a heat icon to it to mark it as the boosted card.

Again, these are minor annoyances, though issue 1 could cause people to spin out around a corner.

• ماذا حدث عند محاولة إجراء هذه الحركة داخل اللعبة (رسالة خطأ ، رسالة شريط حالة اللعبة ، ...)؟

• ما هو متصفحك؟

• يرجى وصف مشكلة العرض. إذا لديك لقطة شاشة عن هذا الخطأ (من المفضل)، يمكنك استخدام خدمة إستضافة للصور من اختيارك (snipboard.io مثلاً) لتحميلها و نسخ/لصق الرابط هنا.

I've noticed a few display annoyances when playing a stress card.

1) Playing a stress card does not change the dot to where your car will end. If I just play a 4 the dot is 4 spaces ahead. If I play a 4 and Stress, the dot is 4 spaces ahead. Please adjust the dot to be 5-8 spaces ahead so there are four dots. This will account for the range of spaces. A minor upgrade from there would be to use the known information of what is in my hand and top card of discard. For example, if I have two 3s in my hand and the last 3 is the top of my discard then the stress is only 1,2 or 4 - so the dots would be at 4+(1,2,4) = 5,6,8.

2) When resolving the stress card, the flipped card is just added to the play area. Please overlap the Stress card with the flipped card as I would in real life.

3) Similarly, when resolving a boost, please don't just add the boost flip card to the play area. Maybe separate it by a little space, or if possible, add a heat icon to it to mark it as the boosted card.

Again, these are minor annoyances, though issue 1 could cause people to spin out around a corner.

• ما هو متصفحك؟

• يرجى نسخ / لصق النص المعروض باللغة الإنجليزية بدلاً من لغتك. إذا لديك لقطة شاشة عن هذا الخطأ (من المفضل)، يمكنك استخدام خدمة إستضافة للصور من اختيارك (snipboard.io مثلاً) لتحميلها و نسخ/لصق الرابط هنا. هل هذا النص متاح في translation system ؟ إذا كانت الإجابة بنعم ، فهل تمت ترجمتها لأكثر من 24 ساعة؟

I've noticed a few display annoyances when playing a stress card.

1) Playing a stress card does not change the dot to where your car will end. If I just play a 4 the dot is 4 spaces ahead. If I play a 4 and Stress, the dot is 4 spaces ahead. Please adjust the dot to be 5-8 spaces ahead so there are four dots. This will account for the range of spaces. A minor upgrade from there would be to use the known information of what is in my hand and top card of discard. For example, if I have two 3s in my hand and the last 3 is the top of my discard then the stress is only 1,2 or 4 - so the dots would be at 4+(1,2,4) = 5,6,8.

2) When resolving the stress card, the flipped card is just added to the play area. Please overlap the Stress card with the flipped card as I would in real life.

3) Similarly, when resolving a boost, please don't just add the boost flip card to the play area. Maybe separate it by a little space, or if possible, add a heat icon to it to mark it as the boosted card.

Again, these are minor annoyances, though issue 1 could cause people to spin out around a corner.

• ما هو متصفحك؟

• يرجى توضيح اقتراحك بدقة وإيجاز بحيث يكون من السهل قدر الإمكان فهم ما تعنيه.

I've noticed a few display annoyances when playing a stress card.

1) Playing a stress card does not change the dot to where your car will end. If I just play a 4 the dot is 4 spaces ahead. If I play a 4 and Stress, the dot is 4 spaces ahead. Please adjust the dot to be 5-8 spaces ahead so there are four dots. This will account for the range of spaces. A minor upgrade from there would be to use the known information of what is in my hand and top card of discard. For example, if I have two 3s in my hand and the last 3 is the top of my discard then the stress is only 1,2 or 4 - so the dots would be at 4+(1,2,4) = 5,6,8.

2) When resolving the stress card, the flipped card is just added to the play area. Please overlap the Stress card with the flipped card as I would in real life.

3) Similarly, when resolving a boost, please don't just add the boost flip card to the play area. Maybe separate it by a little space, or if possible, add a heat icon to it to mark it as the boosted card.

Again, these are minor annoyances, though issue 1 could cause people to spin out around a corner.

• ما هو متصفحك؟